Flute's G key not working
Moderators: Classitar, pied_piper, Phineas
-
- Posts: 8
- Joined: Sat Jun 27, 2020 6:52 am
Flute's G key not working
Hello! So my flutes key G is not working properly, when I play G# its perfect. But when I do G it does not sound right its either feeling weird from the headjoint to the key G or it sounds like a bad F# tone. The day before yesterday it played perfect but now i don't know i had this problem since yesterday. I checked if the pads are closed properly. I tried playing with the screws and so but nothing worked. I don't have an instrumment shop near me or anything. Anyone might have any idea? Please any ideas would not hurt trying I'm so sad i can't play the flute now...
Oh btw sometimes the G comes back then just goes away and sounds bad again...
Oh btw sometimes the G comes back then just goes away and sounds bad again...
- pied_piper
- Posts: 1962
- Joined: Sat Mar 31, 2007 1:31 pm
- Location: Virginia
Re: Flute's G key not working
Well, "playing with the screws" is highly ill advised if you are not trained in instrument repair. It's sort of like opening the hood of an automobile and playing with every nut, bolt, or adjustment that you see. It's likely that whatever was wrong, if you moved any adjustment screws, you've likely made it worse or caused new problems.
Is it only the G that is not playing correctly or can you play notes below G? (F, E D, Low C?)
Is it only the G that is not playing correctly or can you play notes below G? (F, E D, Low C?)
"Never give a flute player a screwdriver."
--anonymous--
--anonymous--
-
- Posts: 8
- Joined: Sat Jun 27, 2020 6:52 am
Re: Flute's G key not working
pied_paper i did not exactly play with the screws i only checked if some were lose or something and i did it with care for example if i did 4 turns then i reveresed them to exact. and yes i can play the notes below the only problem is the key Gpied_piper wrote: ↑Mon Jun 29, 2020 4:37 pmWell, "playing with the screws" is highly ill advised if you are not trained in instrument repair. It's sort of like opening the hood of an automobile and playing with every nut, bolt, or adjustment that you see. It's likely that whatever was wrong, if you moved any adjustment screws, you've likely made it worse or caused new problems.
Is it only the G that is not playing correctly or can you play notes below G? (F, E D, Low C?)
- pied_piper
- Posts: 1962
- Joined: Sat Mar 31, 2007 1:31 pm
- Location: Virginia
Re: Flute's G key not working
Does your flute have a split E?
"Never give a flute player a screwdriver."
--anonymous--
--anonymous--
-
- Posts: 8
- Joined: Sat Jun 27, 2020 6:52 am
Re: Flute's G key not working
Yes! My flute is E mechanism or so my friend told me.
- pied_piper
- Posts: 1962
- Joined: Sat Mar 31, 2007 1:31 pm
- Location: Virginia
Re: Flute's G key not working
OK, so with Split-E, when you play G, the G lever is supposed to close the double G/G# keys. Because you can play lower notes but not G, the lever indicated by "G" (with a screw) in the photo is probably not closing both the G/G# keys. When you play notes with the E key, it properly closes the G key via the "E" lever indicated in the photo.
With a jeweler's screwdriver that fits the "G" adjustment screw (in the photo it shows a Philips screw but many flutes have a slotted screw), turn it 1/8th of a turn clockwise and try playing the G again. If it plays, you are finished. If not repeat the screw adjustment another 1/8th turn and try playing again. Don't move the screw more than about a 1/2 turn. If that doesn't fix the problem, return the screw back to it's original position and seek a repair tech to check it over and repair it.
Let us know if the adjustment screw solves your problem.
With a jeweler's screwdriver that fits the "G" adjustment screw (in the photo it shows a Philips screw but many flutes have a slotted screw), turn it 1/8th of a turn clockwise and try playing the G again. If it plays, you are finished. If not repeat the screw adjustment another 1/8th turn and try playing again. Don't move the screw more than about a 1/2 turn. If that doesn't fix the problem, return the screw back to it's original position and seek a repair tech to check it over and repair it.
Let us know if the adjustment screw solves your problem.
- Attachments
-
- Split-E.jpg (118.3 KiB) Viewed 63520 times
"Never give a flute player a screwdriver."
--anonymous--
--anonymous--
-
- Posts: 8
- Joined: Sat Jun 27, 2020 6:52 am
Re: Flute's G key not working
thanks i will try that!pied_piper wrote: ↑Wed Jul 01, 2020 4:25 pmOK, so with Split-E, when you play G, the G lever is supposed to close the double G/G# keys. Because you can play lower notes but not G, the lever indicated by "G" (with a screw) in the photo is probably not closing both the G/G# keys. When you play notes with the E key, it properly closes the G key via the "E" lever indicated in the photo.
With a jeweler's screwdriver that fits the "G" adjustment screw (in the photo it shows a Philips screw but many flutes have a slotted screw), turn it 1/8th of a turn clockwise and try playing the G again. If it plays, you are finished. If not repeat the screw adjustment another 1/8th turn and try playing again. Don't move the screw more than about a 1/2 turn. If that doesn't fix the problem, return the screw back to it's original position and seek a repair tech to check it over and repair it.
Let us know if the adjustment screw solves your problem.
-
- Posts: 8
- Joined: Sat Jun 27, 2020 6:52 am
Re: Flute's G key not working
pied_piper wrote: ↑Wed Jul 01, 2020 4:25 pmOK, so with Split-E, when you play G, the G lever is supposed to close the double G/G# keys. Because you can play lower notes but not G, the lever indicated by "G" (with a screw) in the photo is probably not closing both the G/G# keys. When you play notes with the E key, it properly closes the G key via the "E" lever indicated in the photo.
With a jeweler's screwdriver that fits the "G" adjustment screw (in the photo it shows a Philips screw but many flutes have a slotted screw), turn it 1/8th of a turn clockwise and try playing the G again. If it plays, you are finished. If not repeat the screw adjustment another 1/8th turn and try playing again. Don't move the screw more than about a 1/2 turn. If that doesn't fix the problem, return the screw back to it's original position and seek a repair tech to check it over and repair it.
Let us know if the adjustment screw solves your problem.
it did not fix t
but like i feel like from the headjoint
the air to the key G is not right
its either its not getting the air or its like i don't know air stuck?
i Can't explain it well but the air is not right i can feel it from the headjoint when playing key G the sound comes back sometimes
but then goes away the other second
I sadly don't have repair shop/tech do you have any more ideas? I really miss playing the flute...
-
- Posts: 8
- Joined: Sat Jun 27, 2020 6:52 am
Re: Flute's G key not working
I managed to fix it but it was spring pop on one keypied_piper wrote: ↑Wed Jul 01, 2020 4:25 pmOK, so with Split-E, when you play G, the G lever is supposed to close the double G/G# keys. Because you can play lower notes but not G, the lever indicated by "G" (with a screw) in the photo is probably not closing both the G/G# keys. When you play notes with the E key, it properly closes the G key via the "E" lever indicated in the photo.
With a jeweler's screwdriver that fits the "G" adjustment screw (in the photo it shows a Philips screw but many flutes have a slotted screw), turn it 1/8th of a turn clockwise and try playing the G again. If it plays, you are finished. If not repeat the screw adjustment another 1/8th turn and try playing again. Don't move the screw more than about a 1/2 turn. If that doesn't fix the problem, return the screw back to it's original position and seek a repair tech to check it over and repair it.
Let us know if the adjustment screw solves your problem.
Re: Flute's G key not working
hi yes i have the same problem the G key F,E, D, and low c keys aren't working either i have a split E flute how do i fix itpied_piper wrote: ↑Mon Jun 29, 2020 4:37 pmWell, "playing with the screws" is highly ill advised if you are not trained in instrument repair. It's sort of like opening the hood of an automobile and playing with every nut, bolt, or adjustment that you see. It's likely that whatever was wrong, if you moved any adjustment screws, you've likely made it worse or caused new problems.
Is it only the G that is not playing correctly or can you play notes below G? (F, E D, Low C?)