low c

For Anything and Everything to do with Flute Playing and Music

Moderators: Classitar, pied_piper, Phineas

Post Reply
Lily
Posts: 11
Joined: Thu May 21, 2009 5:23 pm
Location: Iceland

low c

Post by Lily »

Hello,
I'm taking a test in may, and I have to play chromatic scale from f to f" (I think, just the lowest f to the third f). The point is, my flute teacher thought I had to go down to the lowest c. I can't go down to that point until I have practiced for a while. but, my teacher says that it may be a bit harder for me because my flute is fairly new (from last summer) and it had a cork piece to hold it in place. Not sure why that matters, but I want to ask if I can fix this without damaging the flute, or how long it will take for the flute to be normal.
I got Barrington Model 229 that I am so happy with (Thanks again Phineas).

Also, I forgot to clean my flute after marching band practice, and now the bottom part of the head piece (where it joins with the next flute part) looks yellow-ish. Just wondering if I'm imaging this.

My flute teacher is great. He's from Poland but speaks some sort of Icelandic (my first language) and english mixed togeather. I just started playing last january, and I'm very pleased with the progress :)
-Lily

User avatar
Zevang
Posts: 580
Joined: Mon Jul 24, 2006 5:28 pm

Post by Zevang »

Lily, any repair, adjustment and overall cleaning must be done by a prepared technician. You sure may clean the inside with a soft cloth, so you remove moisture. This must be done everytime you will keep the flute stored in its case for hours.

I'm not quite sure I understood what you meant, but anyway the fact that you're (temporarily) unable to get to low C may be a problem in your instrument, not you. Again, only a good technician should help you solve this. For the rest, just practice, practice and practice... :-)

fluteguy18
Posts: 2311
Joined: Sun Jul 16, 2006 3:11 pm

Post by fluteguy18 »

You have a silver plated instrument. The tenon portion of the headjoint turns yellow/grey (depending on the base metal alloy) with use.

Don't worry about it.

Post Reply