Do synthetic headjoint plug stoppers REALLY WORK BETTER?

Flute History and Instrument Purchase

Moderators: Classitar, pied_piper, Phineas

User avatar
flutego12
Posts: 554
Joined: Mon Apr 02, 2012 2:51 am
Location: Southern Hemisphere, Earth

Re: Do synthetic headjoint plug stoppers REALLY WORK BETTER?

Post by flutego12 »

Thanks re above Bob.
flutist with a screwdriver

User avatar
flutego12
Posts: 554
Joined: Mon Apr 02, 2012 2:51 am
Location: Southern Hemisphere, Earth

Re: Do synthetic headjoint plug stoppers REALLY WORK BETTER?

Post by flutego12 »

What about the plug? If it is so tight would taking it out to try on multiple flutes affect the plug or would you advice it staying put where it is installed till the end of its days.[/quote]
If you try to turn the crown clockwise but can't, the cork is too tight.
To sand the cork so it's perfectly round, spin it in a lathe, bench motor, or drill while sanding.
If the cork is properly fitted, removing it will not harm it. It has to be removed to inspect it.
If the cork is installed without paraffin or cork grease, sometimes if it has not been removed for a long time (years), it may stick to the headjoint tube. It appears to have.That may cause it to tear or split when it is removed. I believe that removing it periodically lessens the chance that it may stick and then be damaged on removal. After removing it, relubricate it with paraffin or cork grease before reinstalling.[/quote]

In any case, I have decided to give Seidman's plug a try. Rave reviews and as you say, does not break the bank. Maintenance free.
flutist with a screwdriver

Post Reply